Handleiding
Je bekijkt pagina 16 van 24
u
Place the swap bearing block on the other side and use a
screwdriver to screw it on. Start with the screw Fig.37(2)
at the bottom in the middle.
u
Tighten screw Fig.37(3) and screw Fig.37(4).
u
Insert the bearing bolt Fig. 37 (5) completely. Ensure that
the latching cam is pointing towards the rear.
u
Place the swap bearing block on the other side and use a
screwdriver to screw it on. Start with the screw(2) at the
bottom in the middle.*
u
Tighten screw(3) and screw(4).*
u
Turn the closing damper connection (5) by 180°. Use
screwdriver to screw it onto the other side of the swap
bearing block.*
u
Insert the bearing bolt (6) completely. Ensure that the
latching cam is pointing towards the rear.*
Fig.38
u
Re-attach the cover Fig.38(1) to the other side.
14.9 Moving the door bearing parts to
the other side
Top of door
Fig. 39
u
The bottom side of door faces upwards: Turn the door.
u
Pull out the guide bush: Press the tab Fig. 39 (1) with
a flat-blade screwdriver and at the same time move the
flat-blade screwdriver under the guide bush Fig. 39(2).
u
Insert the guide bush Fig. 39 (3) supplied on the other
side of the housing.
u
The upper side of door faces upwards: Turn the door.
14.10 Moving the handles to the other
side*
For all appliances:
Fig.40
u
Remove the cover Fig.40(1).
u
Unscrew screws Fig.40(2) with screwdriver.
u
Remove the handle Fig.40(3).
u
Use a slotted screwdriver to lift the side plug Fig. 40 (4)
carefully and pull it out.
u
Re-insert the plug Fig.40(5) on the other side.
Door hinge change
16 * Depending on model and options
Bekijk gratis de handleiding van Liebherr SWNsdh 5264 Prime, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | SWNsdh 5264 Prime |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 6456 MB |
