Handleiding
Je bekijkt pagina 15 van 24
Fig.34
u
Remove the washer Fig.34(1).
u
Unscrew screws Fig.34(2) with screwdriver.
u
Remove the cover Fig.34(3) carefully.
u
Turn the bearing block with film Fig. 34 (4) by 180° and
screw it tight on the other side.
u
Turn the cover Fig. 34 (5) by 180° and attach to the other
side.
u
Slide on the washer Fig.34(6) from the front.
14.8 Moving the lower bearing parts to
the other side
For all appliances:
WARNING
Danger of injury due to door falling out!
If the bearing parts are not screwed on tightly enough, the
door may fall out. This can result in serious injuries. In
addition, the door may not close with the result that the
appliance does not cool properly.
u
Screw on the bearing brackets/bearing pins tightly with
4Nm.
u
Check all screws and retighten them if necessary.
Fig.35*
u
Pull the bearing bolt Fig.35(1) out upwards completely.*
u
Use screwdriver to unscrew the screw Fig. 35 (2) and
remove the closing damper connection.*
u
Use screwdriver to unscrew the screws Fig. 35 (3) and
remove the swap bearing block.*
For all appliances:
Fig.36
u
Remove cover Fig.36(1).
Fig.37
Door hinge change
* Depending on model and options 15
Bekijk gratis de handleiding van Liebherr SWNsdh 5264 Prime, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | SWNsdh 5264 Prime |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 6456 MB |
