Handleiding
Je bekijkt pagina 26 van 36
u
Remove the pull-out board.
u
Lift the container Fig. 93(5) at the front.
u
Remove the container.
Fig. 94
u
Remove the hang-on tray Fig. 94(6).
u
If there are ice cubes in the hang-on tray: Empty the
hang-on tray.
w
The container and hang-on tray have been removed
and you can clean them. (see 9.3.4 Cleaning the
equipment)
Removing the pull-out board
Make sure that the following requirements are fulfilled:
q
Containers have been removed. (see Removing the
container)
Fig.95
u
Slide in the pull-out board. Fig.95(7)
u
Lift the pull-out board at the front left. Fig.95(8)
u
Lift the pull-out board at the front right. Fig.95(9)
w
The pull-out board is detached from the attachment
at the front.
u
Take out the pull-out board to the front. Fig.95(10)
w
The pull-out board has been removed and you can
clean it. (see 9.3.4 Cleaning the equipment)
Removing the glass shelf from under the pull-out
board
(see 8.3 Glass shelves)
8.2.2 Inserting the pull-out board with
IceTower
Inserting the glass shelf under the pull-out board
(see 8.3 Glass shelves)
Inserting the pull-out board
Fig.96
u
Slide the rails in.
Fig.97
u
Place the pull-out board in at an angle behind the
front lug.
u
Slide it in at an angle. Make sure that the stop is
behind the lug on both sides. Fig.97(11)
u
Lower the pull-out board at the front. Fig.97(12)
Fig.98
u
Push the pull-out board down at the front.
w
The pull-out board clicks into place.
Inserting the container
Make sure that the following requirements are fulfilled:
q
The pull-out board is inserted. (see Inserting the
pull-out board)
Equipment
26 * Depending on model and options
Bekijk gratis de handleiding van Liebherr SF5291, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | SF5291 |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 5283 MB |
