Lescha S 180 handleiding
Handleiding
Je bekijkt pagina 24 van 67
24
6.3.2 Removing the drive pinion and drive shaft ( Fig. 3)
Remove the angle plate (7) after
loosening the screw (8).
Drive through the dowel pin (11).
Remove the V-belt.
Remove the engine and the
protection plate.
Remove drive shaft compl. with
belt pulley (14) in the direction of
the engine compartment.
When the drive pinion (10) is
firmly seated, a pointed
screwdriver can be driven
between the ring (12) and the
drive pinion (10). Turn the drive
shaft (14) at the belt pulley.
If this is not successful, the
mixing drum must be removed so
that the drive shaft can be
penetrated with a punch.
Parts list for Fig. 3
Item Designation Pcs. Id-no. S 180 ID-no. S 230
1
Mixing drum with item 2
1 51203 51205
2
Gear rim with items 3-5
1 42783 42783
3
Hexagon screw M10x35
4/6 54547 54547
4
Metal shim
4/6 41940 41940
5
Locknut
4/6 48427 48427
6
Bearing bracket
1 52901 52902
7
Angle plate with item 8
1 52921 52921
8
Sheet metal screw 6.3x19
1 48092 48092
9
Bearing with mounting parts
1 52924 52924
10
Drive pinion with item 11
1 44298 44298
11
Dowel pin
1 48022 48022
13
Circlip
1 40750 40750
14
Drive shaft compl. with pulley
1 32026 32026
15
Deep groove ball bearing 6203.2RS - RN
1/2 44375 44375
18
Shim washer 17 x 24
1 49133 49133
Fig. 3
Bekijk gratis de handleiding van Lescha S 180, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lescha |
| Model | S 180 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11043 MB |
