Handleiding
Je bekijkt pagina 29 van 100
Set a supervisor password
You can set the supervisor password to prevent unauthorized access to the UEFI BIOS menu.
Attention: If you forget the supervisor password, a Lenovo-authorized service personnel cannot reset your
password. You must take your computer to a Lenovo-authorized service personnel to have the system board
replaced. Proof of purchase is required and a fee will be charged for parts and service.
Step 1. Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu.
Step 2. Select Security ➙ Password ➙ Set Supervisor Password.
Step 3. Enter a password string that contains only letters and numbers and then press Enter.
Step 4. Enter the password again and press Enter.
Step 5. Press F10 to save changes and exit the UEFI BIOS menu.
Next time you turn on the computer, you should enter the supervisor password to enter the UEFI BIOS menu.
Change or remove the supervisor password
Only the administrator can change or remove the supervisor password.
Step 1. Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu.
Step 2. Select Security ➙ Password ➙ Set Supervisor Password and press Enter.
Step 3. Enter the current password.
Step 4. In the Enter New Password field, enter the new password.
Step 5. In the Confirm New Password field, enter the new password again.
Note: If you want to remove the password, leave both fields blank, and press Enter twice.
Step 6. Press F10 to save changes and exit the UEFI BIOS menu.
If you remove the supervisor password, the user password is also removed.
Set a user password
You must set the supervisor password before you can set the user password.
Attention: If you forget the supervisor password, a Lenovo-authorized service personnel cannot reset your
password. You must take your computer to a Lenovo-authorized service personnel to have the system board
replaced. Proof of purchase is required and a fee will be charged for parts and service.
Step 1. Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu.
Step 2. Select Security ➙ Password ➙ Set User Password and press Enter.
Step 3. Enter a password string that contains only letters and numbers and then press Enter.
Note: The user password should be different from the supervisor password.
Step 4. Enter the password again and press Enter.
Step 5. Press F10 to save changes and exit the UEFI BIOS menu.
Change or remove the user password
Follow the instructions to change or remove the user password.
Step 1. Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu.
Chapter 4. Configure advanced settings 23
Bekijk gratis de handleiding van Lenovo 13w 2-in-1 Gen 3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lenovo |
| Model | 13w 2-in-1 Gen 3 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 12729 MB |
