Legrand Ensto Pro EVF200 handleiding
Handleiding
Je bekijkt pagina 16 van 40
RAK112B_ENG / 2023-06-27
16 / 40
7.5. EVF200 mounting on Unimi concrete foundation
This example describes the installation procedure when a concrete foundation supplied by Unimi Solu-
tions is used.
Installation accessories
Ground mounting box EVTL32.00 / EVTL34.00 1 pcs
Please order the following items from www.unimi.se
Concrete foundation Ensto Pro, product code 100-1 1 pcs
Cover plate 1 pcs
Ensto EVF compatible adapter element, product code 100-13 1 pcs
Installation steps
Figure 1
• Dig a trench for cable conduits and an excavation
pit for the concrete foundation to applicable depths.
The pit oor should be compacted and level.
• Adjust the depth of the pit so that the top of the
foundation will be ush with the nal surrounding
ground surface. Take into consideration the possible
paving materials.
• Close the unused conduit openings with plugs in-
cluded in the foundation delivery.
• Lift the foundation into the installation pit. You can
use the attachment bar embedded in the foundation
as a lifting point. Make sure that the mounting bar
is in a direction that enables the installation of the
charging station in correct position.
• Put cable conduits into the trenches and install the
conduits to relevant inlets.
• Pull electric cables through the conduits into the
foundation.
Figure 2
• Tighten the foundation to its place by lling the ex-
cess space outside the foundation with gravel.
• Set the nal layer of gravel so that the top of the
foundation will be ush with ground or the nal pav-
ing material.
• Always put a cover plate on the foundation if the
charging station is installed in a separate session
than the foundation.
Figure 3
• Remove the cover plate before you start the instal-
lation work.
1
2
3
Bekijk gratis de handleiding van Legrand Ensto Pro EVF200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Legrand |
| Model | Ensto Pro EVF200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4463 MB |
