Legrand Ensto Pro EVF200 handleiding
Handleiding
Je bekijkt pagina 15 van 40
RAK112B_ENG / 2023-06-27
15 / 40
Installation steps
1. Assemble the concrete foundation adapter.
2. Attach the mounting box EVTL32.00 / EVTL34.00 on the concrete foundation adapter EVTL36.00 and
put the assembly on the concrete foundation.
3. Attach the assembly in place. Use the screws on the concrete foundation.
4. EVTL32.00: Pull electrical cables through the ground mounting box cable gland(s) approx. 400 mm
measured from the upper end of the mounting box.
EVTL34.00: Pull electrical cables through the ground mounting box cable gland(s) and further
through the mounting box cable hole approx. 400 mm measured from the upper end of the mount-
ing box.
5. Tighten the cable gland. Close the unused cable entries with cable gland plugs.
6. Open the maintenance door of the charging station.
7. Remove the nuts and the washers from the ground mounting box.
8. Lift the charging station on the mounting box. Pull electrical cables through the cable hole.
9. Attach the charging station in place with the washers and the nuts you removed from the ground
mounting box.
10. EVTL32.00: Remove the supply cable sheath at the length of max. 200 mm.
EVTL34.00: Remove the supply cable sheath beginning from the cable gland exit.
11. Cut the supply cable conductors to applicable lengths. The earth conductor must be long enough,
so that if a fault occurs it is the last one that comes loose.
12. Strip the supply cable conductors 25 mm.
13. Connect the supply cable wires to the sup-
ply terminal blocks.
14. Make sure that the PE is connected to the
charging station.
15. Switch on F0, F1, F2 (if present) and QF1.
16. Close the maintenance door.
800
450
80 (EVTL34.00)
46 (EVTL32.00)
Ground surface
Concrete
Adapter EVTL36.00
Concrete foundation
Gravel
Cable protection pipe Ø110
Bekijk gratis de handleiding van Legrand Ensto Pro EVF200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Legrand |
| Model | Ensto Pro EVF200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4463 MB |
