Legrand Ensto Pro EVF200 handleiding
Handleiding
Je bekijkt pagina 14 van 40
RAK112B_ENG / 2023-06-27
14 / 40
7.4. EVF200 mounting on concrete foundation
Installation accessories
Ground mounting box EVTL32.00 / EVTL34.00 1 pcs
Adapter for concrete foundation EVTL36.00 1 pcs
Concrete foundation 1 pcs
This example describes the installation procedure when using a concrete foundation supplied by Sähkö-
Jokinen Oy, product code SJR-08.
If you want to use a foundation manufactured by another supplier, make sure that the foundation is com-
patible with the adapter.
• Plan the installation depth so that the top surface of the adapter is above the ground surface. Take
into consideration the possible paving materials.
• Dig a trench for cable conduits and an excavation pit for the concrete foundation to applicable
depths.
• Lift the foundation into the pit.
• Put cable and possible drain pipes in place. Install the pipes in relevant inlets.
• Close the unused inlets with plugs.
• Tighten the foundation to its place by lling the excess space outside the foundation with gravel.
80 (EVTL34.00)
46 (EVTL32.00)
(25)400
~500
415
min. R900
(800)
Ø110
M12 Threaded bar
Ground surface
Ground mounting
frame EVTL28.00
Concrete
Ground mounting box
EVTL32.00 or
EVTL34.00
Cable protection
pipe
Bekijk gratis de handleiding van Legrand Ensto Pro EVF200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Legrand |
| Model | Ensto Pro EVF200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4463 MB |
