LD Systems ICOA PRO SUB 21 A handleiding
Handleiding
Je bekijkt pagina 24 van 66
OPERATION
24
8.1.3 TURNING THE DEVICE ON OR OFF
1 Flip the switch from the to the position.
ð The display turns on and the device boots.
ð After a few seconds, the device is operational.
2 Flip the switch from the
to the position.
ð The device turns off.
8.1.4 DISCONNECTING A MAINS POWER CABLE
NOTICE
Damage to the Device
a. Make sure that the voltage of the mains power socket matches the device operating
voltage.
b. Use only supplied power cables or original Neutrik powerCON® XX cables. Otherwise
you must not plug or unplug the device under load.
1
2
1 Disconnect the mains power connector of the
mains power cable from the mains power
socket.
2 Pull the locking lever of the bayonet connector
backwards and hold it.
3 Turn the bayonet connector anticlockwise.
4 Pull the bayonet connector out of the socket.
Bekijk gratis de handleiding van LD Systems ICOA PRO SUB 21 A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LD Systems |
| Model | ICOA PRO SUB 21 A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7773 MB |
