Lantronix ION C3110 handleiding
Handleiding
Je bekijkt pagina 9 van 62
Lantronix ION C3110 User Guide
33417 Rev. B https://www.lantronix.com Page 9 of 62
Install Mode: During installation set DIP switch 4 DOWN; leave all other switches in the UP position
(default). This disables Transparent Link Pass-Through and Auto-Negotiation, allowing individual copper
and fiber links to be established (both copper port LEDs will turn ON with each device-to-device
connection) independent of having a complete end-to-end connection.
Operation Mode: After installation is complete (all copper and fiber ports connected and linked), set
all switches to the UP position (default).
Remote Fault Detection: Remote fiber fault detect (RFD) monitors the status of the fiber link. Enable
RFD in the remote converter only. CAUTION: If RFD is enabled in the device at each end of the link, a link
pass-through event will put the converters into an unrecoverable state (unable to establish a link).
Fiber Auto-Negotiation: Fiber Auto-Negotiation allows the fiber interface to detect and then advertise
the supported features of the remote device—active only when a fiber cable is connected to a device
with a negotiating port. The process is as follows:
1. The fiber interface detects the supported features of the remote partner.
2. These abilities are passed to the twisted-pair interface and advertised.
3. Once the twisted-pair interface has a link at the highest common capability, it passes the result
to the fiber interface.
4. The fiber interfaces then start advertising these capabilities. At this point, the link between the
fiber and the negotiating port is complete.
If the C3110 is connected via fiber to another C3110, both SICs must have the Fiber Auto-Negotiation
setting disabled (switch 5 UP).
Note: Link Pass-Through (switch position 4 enabled) cannot be turned OFF (disabled) when Fiber Auto-
Negotiation is ON (enabled).
Bekijk gratis de handleiding van Lantronix ION C3110, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lantronix |
| Model | ION C3110 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10528 MB |
