Kramer VS-84HN handleiding
Handleiding
Je bekijkt pagina 11 van 49
8 VS-84HN - Overview
3.3 Using the IR Transmitter
You can use the RC-IR3 IR transmitter to control the machine via the built-in IR
receiver on the front panel or, instead, via an optional external IR receiver (Model:
C-A35M/IRR-50). The external IR receiver can be located up to 15 meters away
from the machine. This distance can be extended to up to 60 meters when used
with three extension cables (Model: C-A35M/A35F-50).
Before using the external IR receiver, be sure to arrange for your Kramer dealer to
insert the internal IR connection cable (P/N: 505-70434010-S) with the 3.5mm
connector that fits into the REMOTE IR opening on the rear panel. Connect the
external IR
receiver to the REMOTE IR 3.5mm connector.
Note that the IR transmitter can control the VS-84HN only when it is
set to the P2000 mode.
Section 6.7 and Section 8
describe how to switch between Protocol 3000 and
Protocol 2000.
When used in conjunction with the IR transmitter, the VS-84HN can be operated
using serial commands from a PC, remote controller or touch screen using
Protocol 2000 only.
i
Bekijk gratis de handleiding van Kramer VS-84HN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | VS-84HN |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5553 MB |
