Kramer VS-84HN handleiding
Handleiding
Je bekijkt pagina 10 van 49
VS-84HN - Overview
7
VS-84HN – Overview 7
Figure 2: VS-84HN 8x4 HDMI Matrix Switcher Rear Panel
#
Feature
Function
13
OUT HDMI Connectors (1 to 4)
Connect to up to 4 HDMI acceptors
14
IN HDMI Connectors (1 to 8)
Connect to up to 8 HDMI sources
15
RS-232 9-pin D-sub Connector
Connect to a PC/serial controller
16
ETHERNET RJ-45 Connector
Connect to a PC via a LAN
17 ETH RESET Button Press to reset to the factory default IP parameters:
IP number − 192.168.1.39
Mask – 255.255.255.0
Gateway – 192.168.1.1
Depress the button while powering on the device. The device powers up with the factory default IP parameters
18 REMOTE IR Opening
Connect to an external IR receiver for controlling the device via and IR remote controller (see Section 3.3)
Covered by a cap. The 3.5mm jack at the end of the internal IR connection cable fits into this opening
19
Mains Power Connector
Connect to the mains power
20
Mains Power Fuse
Fuse for protecting the device
21
Mains Power Switch
Switch for turning the device on or off
Bekijk gratis de handleiding van Kramer VS-84HN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | VS-84HN |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5553 MB |
