Kramer VP-411DS handleiding

22 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 9 van 22
Connecting the VP-411DS 4x1 Automatic UXGA / Audio Switcher
7
5 Connecting the VP-411DS 4x1 Automatic UXGA / Audio Switcher
.
This section describes how to:
Connect the VP-411DS (see Section
5.1)
Select the default master source signal (see Section
5.2)
Connect the REMOTE connector (see Section
5.3)
Connect a PC (see Section
5.4)
5.1 Connecting the VP-411DS 4x1 Automatic UXGA / Audio Switcher
To connect your VP-411DS
1
Figure 3, as illustrated in the example in :
1. Connect up to four
2
UXGA/AUDIO sources (for example, computer graphics sources)
to the UXGA IN 15-pin HD connectors and to the AUDIO IN 3.5mm mini connector
3
2. Connect the UXGA OUTPUT 15-pin HD connector and the AUDIO OUTPUT 3.5mm
mini connector to the acceptor
.
3
(for example, a display and speakers).
3. If required, connect a local display to the UXGA IN 1 LOOP 15-pin HD connector.
4. Set the PRIORITY DIP-switches (see Section
5.2).
5. If required, connect:
The contact closure remote control PINS (see Section
5.3)
PC and/or controller to the RS-232 port (see Section
5.4)
6. Connect the 12V DC power adapter to the power socket and connect the adapter to the
mains electricity.
1 Switch OFF the power on each device before connecting it to your VP-411DS. After connecting your VP-411DS, switch on its power
and then switch on the power on each device
2 You do not have to connect all the inputs
3 Audio connections are not shown in
Figure 3

Bekijk gratis de handleiding van Kramer VP-411DS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkKramer
ModelVP-411DS
CategorieNiet gecategoriseerd
TaalNederlands
Grootte2500 MB

Caratteristiche Prodotto

Kleur van het productZwart
Gewicht1100 g
GebruikershandleidingJa
Stroomvoorziening12V DC, 230mA
Maximum resolutie1600 x 1200 Pixels