Kramer VIA GO3 handleiding
Handleiding
Je bekijkt pagina 11 van 113
Kramer Electronics Ltd.
VIA GO3 – For Installer: Connecting VIA GO3
11
5 For Installer: Connecting VIA
GO3
Always switch off the power to each device before connecting it to your VIA GO3. After
connecting your VIA GO3, connect its power and then switch on the power to each device.
5.1 Connecting Device
If you wish to use a Kramer active optical pluggable HDMI cable with your VIA GO3, contact
your local Kramer office to assist in purchasing the correct cable.
Figure 5: Connecting VIA GO3
To connect VIA GO3 as illustrated in the example in Figure 5.
1. Connect a keyboard and mouse to the USB 3.0 Connector (See Defining VIA GO3
Wireless Presentation Solution on page 9).
2. Connect an HDMI display to the HDMI Connector to be used as the main display for
the meeting (see Connecting the Main Display on page 12).
If you want to use a Kramer active optical pluggable HDMI cable with your VIA GO3,
contact your local Kramer office to assist in purchasing the correct cable.
3. Connect the LAN (Local Area Network) cable to the RJ-45 connector
-OR- Connect to your network using a commercial wireless router.
4. Connect wirelessly with a supported device (see Supported Devices on page 8) after
installing the Kramer VIA app (see For User: Connecting to the VIA GO3 on page 91).
The following ports are not in use and covered by rubber covers:
1. HDMI OUT 2.
2. USB-C.
3. Analog audio.
1
4
5
Bekijk gratis de handleiding van Kramer VIA GO3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | VIA GO3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 21397 MB |
