Kramer VIA GO3 handleiding
Handleiding
Je bekijkt pagina 10 van 113
Kramer Electronics Ltd.
VIA GO3 – For Installer: Mounting VIA GO3
10
4 For Installer: Mounting VIA GO3
This section provides instructions for mounting VIA GO3. Before installing, verify that the
environment is within the recommended range:
• Operation temperature – 0 to 40C (32 to 104F).
• Storage temperature – -40 to +70C (-40 to +158F).
• Humidity – 10% to 90%, RHL non-condensing.
Caution:
• Mount VIA GO3 before connecting any cables or power.
• The device is intended to be installed at a height of 2 meters or less.
Warning:
• Ensure that the environment (e.g., maximum ambient temperature & air flow) is
compatible with the device.
• Avoid uneven mechanical loading.
• Appropriate consideration of equipment nameplate ratings should be used for avoiding
overloading of the circuits.
• Reliable earthing of rack-mounted equipment should be maintained.
You can install VIA GO3 using one of the following 3
methods:
1. Mount on a flat surface or a wall:
Secure the mounting bracket to a flat surface /
wall with screws.
2. Mount on the rear of a monitor.
Secure the mounting bracket to VESA holes located on the
rear of the monitor.
3. Mount in a rack mount.
Secure the mounting bracket(s) to the rack
mount with dedicated screws.
When mounting the device on a display, the installer
MUST secure the display to prevent instability.
Bekijk gratis de handleiding van Kramer VIA GO3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | VIA GO3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 21397 MB |
