Kramer PT-2C handleiding
Handleiding
Je bekijkt pagina 7 van 16
Kramer Electronics Ltd.
PT‑2C – Connecting the PT‑2C
5
Connecting the PT‑2C
Always switch off the power to each device before connecting it to your PT‑2C. After
connecting your PT‑2C, connect its power and then switch on the power to each device.
Figure 2: Connecting the PT‑2C Extended EDID Processor
To connect the PT‑2C, as illustrated in the example in Figure 2:
1. Connect the HDMI source (for example, a PC) to the HDMI IN connector.
2. Connect the HDMI OUT connector to an HDMI acceptor (for example, a display).
3. Connect the USB port to a laptop running EDID Designer to modify the EDID, or to a PC
to upgrade the firmware of the PT‑2C.
Bekijk gratis de handleiding van Kramer PT-2C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | PT-2C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1660 MB |
