Kramer MTX3-88-HSA handleiding
Handleiding
Je bekijkt pagina 21 van 77
Kramer Electronics Ltd.
MTX3-88-HSA – Operating MTX3-88-HSA via Front Panel Buttons
19
Operating via Ethernet
You can connect to MTX3-88-HSA via Ethernet using either of the following methods:
• Directly to the PC using a crossover cable (see Connecting Ethernet Port Directly to a PC
on page 19).
• Via a network switch or router, using a straight-through cable (see Connecting Ethernet Port
via a Network Switch on page 21).
If you want to connect via a router and your IT system is based on IPv6, speak to your IT
department for specific installation instructions.
Connecting Ethernet Port Directly to a PC
You can connect the Ethernet port of MTX3-88-HSA directly to the Ethernet port on your PC
using a crossover cable with RJ-45 connectors.
This type of connection is recommended for identifying
MTX3-88-HSA
with the factory configured default IP address.
After connecting MTX3-88-HSA to the Ethernet port, configure your PC as follows:
1. Click Start > Control Panel > Network and Sharing Center.
2. Click Change Adapter Settings.
Bekijk gratis de handleiding van Kramer MTX3-88-HSA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | MTX3-88-HSA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11584 MB |
