Kramer MTX3-88-HSA handleiding
Handleiding
Je bekijkt pagina 15 van 77
Kramer Electronics Ltd.
MTX3-88-HSA – Operating MTX3-88-HSA via Front Panel Buttons
13
2. While D-AUDIO is on, select an OUT button. The button illuminates.
If the signal source of this channel audio is from HDMI audio, the corresponding HDMI IN
button illuminates.
3. Press the corresponding IN button, or the OFF button, and switch the output to the
corresponding channel immediately.
When switching you can also press:
ALL (instead of an output button) and then an input button to route the selected input to all
the outputs.
To switch an analog audio input to a digital output:
1. Press D-AUDIO twice.
The button flashes (analog audio input to HDMI output mode).
2. While D-AUDIO flashes, select an OUT button. The button illuminates.
If the signal source of this channel audio comes from analog audio, the corresponding
HDMI IN button is on; otherwise, all HDMI IN buttons are not illuminated.
3. Press the corresponding IN 1 ~ IN 4 button, or the OFF button, and switch the output to
the corresponding channel immediately.
When switching you can also press:
ALL (instead of an output button) and then an input button to route the selected input to all
the outputs.
Switching Video and Audio Signal Simultaneously
You can select the digital audio signal to switch to the output together with the video signal.
To switch the audio and video signals together to an output:
1. Press D-AUDIO and VIDEO simultaneously.
The buttons illuminate. The buttons light with the input signal and output lights on.
2. Press an OUT SELECTOR Button (1 to 8).
The button illuminates. The IN button light corresponds to the current video switch.
Press the ALL Button (instead of an output button) to route the selected input to all the
outputs.
3. Press an IN (1 to 8), or OFF button. The selected video and audio input is switched to
the selected output (or to all the outputs if ALL was pressed instead).
Switching Video and Analog Audio Signal Simultaneously
You can select the analog audio signal to switch to the output together with the video signal.
To switch the analog audio and video signals together to an output:
1. Press A-AUDIO and VIDEO simultaneously.
The buttons illuminate. The buttons light with the input signal and output lights on.
Bekijk gratis de handleiding van Kramer MTX3-88-HSA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | MTX3-88-HSA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11584 MB |
