Kramer MTX3-16-M handleiding
Handleiding
Je bekijkt pagina 8 van 87
Kramer Electronics Ltd.
MTX3-16-M, MTX3-34-M – Defining MTX3-16-M 16x16 8K Modular Matrix
8
#
Feature
Function
OUTPUTS/INPUTS LCD Display
(OSD menu)
Displays the outputs (upper row) routed to the selected inputs
(lower row). Displays user interface messages and menus.
POWER LED (PS-1 / PS-2)
Lights green when the power supply is active.
ERROR LED (PS-1 / PS-2)
Lights red when an error is detected. Briefly lights red
immediately following a power disruption (e.g., cable
disconnection, power off, and so on).
Figure 2: MTX3-16-M 16x16 8K Modular Matrix Rear Panel
#
Feature
Function
Slots for up to 4 Matrix Cards
The left side of MTX3-16-M has 4 slots for insertion of matrix cards
and the right side (26) has another 4 slots.
Hot plugging: Cards can be inserted while the device is operating,
and input/output ports are automatically identified and numbered.
Port input/output settings can be changed and flexibly connected to
other module cards’ input/output ports.
Matrix card ports are identified by ID numbers allocated when they
are inserted (see Identifying Input / Output Ports on page 15).
PS-1 Power Module and
Switch
The PS-1 must be connected to the mains and switched on to use
the device. The PS-1 power LED (17) lights green when powered.
This module has a fuse holder.
RESET Recessed Button
Press to reboot the MTX3-16-M control card.
RS-232 3-pin Terminal Block
Connector
Connect to a remote operation PC or a remote controller.
NET 1 RJ-45 Connector
100Mpbs Ethernet port for device management and control via LAN.
NET 2-1G RJ-45 Connector
100/10000Mbps Ethernet port for matrix connection to LAN.
PS-2 (POE) Power Module
and Switch
48V PoE (Power over Ethernet) supply for inserted matrix cards.
PoE is supplied when PS-2 is on and PS-1 is off, but MTX3-16-M
itself will not operate.
When switched on and connected to power, the PS-2 power LED
lights green.
Slots for up to 4 Matrix Cards
See
for the explanation. The 4 card insertion slots on the right
side of the device use port IDs 9 to 16.
16
17
18
19
20
21
22
23
24
25
18
26
19
Bekijk gratis de handleiding van Kramer MTX3-16-M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | MTX3-16-M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14187 MB |
