Handleiding
Je bekijkt pagina 29 van 39
Kramer Electronics Ltd.
KT-2015 / KT-2015WM – Using the Kramer Control agent (connecting to Brain)
29
2. Controlling the Kramer Control agent by API call
This method of changing settings of the Kramer Control interface can be done remotely, without
using the touch panel.
For more information see Using the Kramer Control Agent’s API on page 26.
Note: The touch panel must be switched on and connected to the same LAN.
a) Open a browser window on a computer connected to the same network as the touch panel.
b) To set the IP of the Control Interface displayed by the Call the touch panel in the following
format:
https://<IP of the touch panel>:9804/launchkramerurl?<IP of the brain interface>:<port #>
• Example 1 (single interface defined in Brain):
If the touch panel IP is “192.168.0.56” and the Brain interface IP is “192.168.22.53:8001”,
enter https://192.168.0.56:9804/launchkramerurl?192.168.22.53:8001
• Example 2 (multiple interfaces defined in Brain):
The URL must include the full interface ID and page. Touch panel IP is “192.168.0.56”
and the Brain interface IP is “192.168.2.53:8001/?interface=e84f5fb8-c5a3-4675-9006-
d79d3e6cfe59&page=5913c07a-9a41-4fac-9870-e87b1ef719df”.
Enter
https://192.168.0.56:9804/launchkramerurl?192.168.2.53:8001/?interface=e84f5fb
8-c5a3-4675-9006-d79d3e6cfe59&page=5913c07a-9a41-4fac-9870-e87b1ef719df
After this command is sent, the touch pad will display the Brain-defined interface and a status
response message returned to the sender.
Figure 19: Example of a successful response message.
Bekijk gratis de handleiding van Kramer KT-2015WM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | KT-2015WM |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 6091 MB |
