Handleiding
Je bekijkt pagina 30 van 39
Kramer Electronics Ltd.
KT-2015 / KT-2015WM – Using the Kramer Control agent (connecting to Brain)
30
3. Setup the touch panel in the Brain Builder
The advantage of this method is that future changes to the interface are automatically uploaded to
the tablet.
The following assumes that:
a) The interface is already setup in the Brain.
b) The touch panel is active and connected to the same network as the Brain.
c) The IP of the touch panel is static and DHCP assigned.
1. Preliminary Setup: In the Devices tab of the Builder screen, add the K-Agent driver as a device.
It must be assigned to the same network gateway as the touch panel.
2. Navigate to the Brain control page on your computer.
3. Select the interface that you want to use on the touch panel.
4. Copy the interface’s URL from the address bar (see the image below).
5. Navigate back to the Builder, double click on the touch panel (in the Devices list) and paste the
URL from the previous step to the Kramer Control URL. Assign it a Friendly Name.
Figure 20: Kramer Control URL in the Builder
6. For the Brain to be able to automatically assign the user interface to the touch panel:
(see the image on the next page)
a) In the Events tab, click System Events and select “Initialization”.
b) Drag the Launch Kramer URL command to the ‘Initialization’ ACTIONS area.
c) Select the Friendly Name (If only one interface is defined, it will be used by default).
Bekijk gratis de handleiding van Kramer KT-2015WM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | KT-2015WM |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 6091 MB |
