Kramer KC-Virtual Brain5 handleiding
Handleiding
Je bekijkt pagina 8 van 33
Kramer Electronics Ltd.
KC-Virtual Brain 5
- Essential First Steps
8
4.2 Connecting Device
Always switch off the power to each device before connecting it to your
KC-Virtual Brain 5.
After connecting your
KC-Virtual Brain 5, connect its power and then switch on the power to
each device.
F
or illustration purposes, the diagram shows connections for KC-Virtual Brain1, except
for the HDMI IN connector.
Figure 2: KV-Virtual Brain 5 Connection Diagram
To connect the KC-Virtual Brain1 as illustrated above (numbers in brackets refer to Figure 1: KC-
Virtual Brain 5 Front):
1. Connect a Local Area Network (LAN) cable to the LAN RJ-45 Connector (2) for
connection to your network.
2. KC-Virtual Brain1 can be controlled from a browser connected to the same network.
Optional: To control the Brain from the local display, connect an HDMI display to the HDMI
OUT Connector (5) and a keyboard and mouse to the USB Connectors (5) and (6).
When a display is connected to the KC-Virtual Brain1, the device’s IP address is displayed at the
bottom of the screen.
3. Connect the 12V DC power adapter to the Power Connector (4) and plug it into the mains
electricity.
Do not turn the device on before connecting the LAN port to the network.
KC-Virtual Brain1 is connected.
Bekijk gratis de handleiding van Kramer KC-Virtual Brain5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | KC-Virtual Brain5 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6436 MB |
