Handleiding
Je bekijkt pagina 98 van 137
98
© 2021 KOSTAL Solar Electric GmbH
System monitoring
Power adjustment/
control
Explanation
Active power control Active power control
P(U) regulation
Parameter of the P(U) curve, which reduces active power if the output voltage
exceeds a certain value
P(F) regulation Set the inverter's maximum active power
Power gradient (%/s)
Parameter of the P(U) curve, which reduces active power if the output voltage
exceeds a certain value
Maximum feed-in capacity (W)
Parameter of the P(f) curve, which decreases active power during overfrequency or
increases active power during underfrequency
Maximum active power Configure settings according to the power supply company for active power control.
Reactive power control Reactive power control
Settling time of reactive power Specifies the reactive power settling time (3 Tao, PT-1 behaviour)
Reactive power mode
Specifies the reactive power control mode.
Configure settings according to the power supply company for reactive power
control.
Energy management Power limitation
Power limitation function
Deactivated: No energy meter connected to the inverter.
KSEM: A KOSTAL Smart Energy Meter is connected to the inverter.
Energy meter position
Installation position of energy meter (grid connection point or consumer)
Ch. 3.11
Modbus address of energy
meter
Energy meter Modbus address
Limitation of active power to [W] Set up power limitation
IP address of energy meter Energy meter IP address
L1-3 grid power Displays the grid power at the individual phases
Total energy Shows the energy supply from the public grid
Total feed-in energy Shows the feed-in into the public grid
L1-3 consumer power Shows the consumer power at the individual phases
Total consumption Shows the total consumption
L1-3 inverter output Shows the inverter output at on the individual phases
Total inverter output Shows the total energy generated by the inverter
Ripple control receiver (RSE) Ripple control receiver control
Activate ripple control receiver
Activate/deactivate ripple control receiver function
Ch. 3.13
RSE active power Set active power value for ripple control receiver
RSE reactive power Set reactive power value for ripple control receiver
RSE power factor Set power factor for ripple control receiver
5
2
3
4
5
6
7
8
9
10
1
Bekijk gratis de handleiding van Kostal Piko CI 30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kostal |
| Model | Piko CI 30 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 13647 MB |
