Handleiding
Je bekijkt pagina 99 van 137
99
© 2021 KOSTAL Solar Electric GmbH
System monitoring
Other settings Explanation
Insulation detection Activate/deactivate isolated network detection
Insulation monitoring
Activate/deactivate insulation detection function.
When enabled, the inverter detects the insulation resistance before it is connected to
the grid.
Residual current monitoring
Activate/deactivate residual current monitoring.
When the function is enabled, the inverter detects the array fault current.
Shadow management
Shadow management
If PV strings are in partial shading, the PV string aected no longer achieves its opti-
mum performance. If shadow management is activated, the inverter adapts the MPP
tracker in such a way that it can operate at maximum possible performance.
Shadow management interval Set the interval of the MPP tracker sampling rate
Insulation resistance
If the value established for insulation resistance is less than the preset value, the
inverter is not connected to the grid
Leakage current limit
Limit value for leakage current detection. If the value established is higher than the
preset value, the inverter will shut down.
Limit value for voltage unbalance Set threshold value for mains voltage unbalance
Dynamic grid support (FRT) Dynamic grid support (FRT = Fault Ride Through)
Positive sequence K factor
Settings for the uninterrupted ride through of grid faults
FRT (Fault Ride Through)
Negative sequence K factor
Monitoring of supply voltage
Undervoltage ride through (V)
UVRT
Overvoltage ride through (V)
OVRT
Grid support mode
Limited grid support (%)
Irregular voltage change (%)
5
2
3
4
5
6
7
8
9
10
1
Bekijk gratis de handleiding van Kostal Piko CI 30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kostal |
| Model | Piko CI 30 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 13647 MB |
