Handleiding
Je bekijkt pagina 19 van 28
Gas Connection
Replacement of gas-type fitting
Tool: Open-end wrench
Steps for operation:
1: Disassemble with a wrench the gas-type fittings from the main gas tube.
When you disassemble/assemble gas connections, use 2 spanners - one for fixing the
gas connection elbow and the other for tightening the gas hose.
2: Connect gas approved fitting onto the main gas tube.
Warning: Do not use another elbow fitting as it may lead to a gas leak!
Warning: Do not use seal tape which is NOT intended for Gas use.
AS4623 compliant teflon tape is recommended.
Preparing to install
Statutory requirements
This installation must conform with the following:
■ Manufacturer’s Installation instructions
■ Local Gas Fitting Regulations
■ Municipal Building Codes
■ Refer to AS/NZS 5601.1 for Gas Installations
■ S.A.A. Wiring Code
■ Local Electrical Regulations
■ Any other statutory regulations
Refer to AS/NZS 5601.1 for piping size details. These built-in cooktops are intended to be
inserted in a benchtop cutout. Only an officially authorised technician should connect the
appliance. Turn off the gas and electricity supply before commencing connection.
Rubber seal
Gas Sealing Tape
or Thread Sealant
When reconnecting
the elbow ensure the
rubber seal is in
place. Do not use
any sealing tape or
thread sealant on
this end of the elbow.
Gas regulator valve
19
LPG gas connection
Natural gas connection
115
115
pressure test point
pressure test point
LPG CONVERSION -
REGULATOR
Bekijk gratis de handleiding van Kleenmaid GCTK9012, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kleenmaid |
| Model | GCTK9012 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4518 MB |