Handleiding
Je bekijkt pagina 49 van 142
47
EN
CAUTION
Risk of material damage and personal injury! Carry out the
connection avoiding all kinds of stress to the appliance.
ADJUSTING THE APPLIANCE (INSTALLER)
• Check the adjustment of the appliance, before to make any adjusting
operation, having a look on proper adjustment sticker data plate, put on the
bottom of the appliance.
• Before any adjustment is attempted, which may be necessary when installing
for the rst time or when converting gas type, take the plug out of the mains
socket.
• When the adjustment or preadjustment has been made, a technician must do
any re-sealing, if any.
• To adjust “reduce rate”, using proper screw driver, from Natural gas to
Butane/Propane ones, light burners one by one and put handle in minimum
position (little ame). Remove the handle and screw clockwise completely
the by-pass screw. Put back in position the handle and check stability ame,
turning the handle from “Maximum” position (big ame) to “Minimum”
position (little ame) and vice-versa.
• To adjust “reduce rate”, using proper screw driver, from Butane/Propane
gases to Natural one, light burners one by one and put handle in minimum
position (little ame). Remove the handle and unscrew anclockwise in the way
to get proper ame. Put back in position the handle and check stability ame,
turning the handle from “Maximum” position (big ame) to “Minimum”
position (little ame) and vice-versa.
• “Primary air adjustment” on hob gas burners is unnecessary.
Adjusting gas taps
The adjustment of the reduced rate position is as follows:
• Light the burner and turn the knob to reduced rate position (little ame).
• Remove the knob which is simply inserted onto tap stem.
• Insert a small screwdriver into the top shaft and turn the throttling screw left
or right until ame of the burner is conveniently regulated to the low position.
• In the case of taps with safety thermocouples, the adjustment screw is on the
side of the stem.
• Make sure that when turning quickly from “Maximum” position to “Minimum”
position, the burner does not extinguish.
Note: If the tap, after long use of the hob, presents some friction to rotation,
do not insist to use it. Contact customer service to have the tap substituted with
the proper one.
Bekijk gratis de handleiding van Klarstein Illuminosa 4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Klarstein |
| Model | Illuminosa 4 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 11944 MB |
