Handleiding
Je bekijkt pagina 48 van 142
46
EN
GAS CONNECTION (INSTALLER)
Note: The installation, the adjustments, conversions and maintenance of the
appliance must only be carried out by a qualied technician or installer. Do not
connect the appliance to the gas supply yourself!
Important notes on gas connection
• Before to connect the appliance to the gas network, check that the adjustment
sticker data plate, put on the bottom of the appliance, correspond to the
available one in the gas network. The adjustment sticker data plate, gives all
the appliance’s setting conditions as: gas type and gas operating pressures.
• Once installed, check there are no leaks using a soapy solution only. Never use
a ame! It is forbidden!
When gas is distributed through ducts the appliance must be connected to the gas
mains with:
• A exible stainless steel, seamless pipe in accordance with the National Rules
in force, with a maximum 2 metres extension and seals in accordance with
the National Rules in force. Make sure that the pipe, once the appliance is
installed, does not come into contact with the mobile parts of the unit in which
the hob is built-in (like drawers for instance), get squashed or is too bent.
• A rigid steel pipe in accordance with the National Rules in force, whose joints
must be made using, threaded ttings in accordance with the Standard ISO
7/1. The use of hemp with suitable adhesives or Teon tape as a sealant is not
allowed.
• A copper pipe in accordance with the National Rules in force, whose joints
must be made using sealed ttings in accordance with the National Rules in
force.
When gas is supplied directly from a gas cylinder, the appliance, supplied by a
pressure regulator must be connected:
• With exible stainless steel, seamless pipes in accordance with the National
Rules in force with a maximum 2 metres extension and seals in accordance
with National Rules in force. Make sure that the pipe does not come into
contact with the mobile parts of the unit in which the hob is built-in (like
drawers for instance), get squashed or is too bent. We recommend attaching
the special adapter to the exible pipe, easily found on the market, to facilitate
connection to the pressure regulator’s hose tting on the cylinder.
Anyway, the pipe connecting the appliance with the gas mains should lie with
smooth bends ,and the rubber gasket preventing leakage added by user between
the appliance’s gas inlet tting and the pipe connection must comply with the
Standard EN 549 (available in specialized shops).
Bekijk gratis de handleiding van Klarstein Illuminosa 4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Klarstein |
| Model | Illuminosa 4 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 11944 MB |
