Kimo CA 310 handleiding
Handleiding
Je bekijkt pagina 11 van 37
4.5. Configure the Modbus communication (optional)
Modbus option must be activated (see chapter 4.6).
4.5.1 Set the slave number: F150
F141 sub-folder is displayed.
➢ Press + key.
“F 150” is displayed on the main screen.
➢ Press OK.
“F150” blinks on the second screen and the slave number is displayed on the main screen (ex: 255).
➢ Press OK.
The 1
st
digit of the slave number blinks.
➢ Press + or - keys to modify it then press OK.
The 2
nd
digit of the slave number blinks.
➢ Press + or - keys to modify it then press OK.
The 3
rd
digit of the slave number blinks.
➢ Press + or - keys to modify it then press OK.
“F150” blinks and the selected slave number is displayed on the main screen.
4.5.2 Set the speed communication: F151
➢ Press + or – key to go to F151 sub-folder.
Speed communication in bits per second is displayed (e.g: 9600).
➢ Press OK.
The speed communication blinks.
➢ Press + or – key to select the required speed communication between the following values:
• 2400 bds
• 4800 bds
• 9600 bds
• 19.2 Kbds
• 38.4 Kbds
• 115.2 Kbds
➢ Press OK.
“F151” blinks and the selected speed communication is displayed on the main screen.
If the Modbus option is selected when ordered the transmitter, the default slave number will be indicated on serial
number label and the default speed is 19200 bds.
4.6. Activate the options
To activate an option, an activation code is necessary. This code is provided by the manufacturer.
Options concerned by the activations codes are the high resolution in pressure (sub-folder F170),
the modbus (sub-folder F171) and air velocity and airow (sub-folder F172).
Ethernet option is factory built.
- High resolution in pressure option: F170
“F150" sub-folder is displayed.
➢ Press + key.
“F170” blinks on the second screen and “0” is displayed on the main screen, meaning the option is not
activated.
➢ Press OK.
“0” blinks.
11
F 100: Congure the transmitter
Bekijk gratis de handleiding van Kimo CA 310, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kimo |
| Model | CA 310 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3754 MB |
