Kimo CA 310 handleiding
Handleiding
Je bekijkt pagina 10 van 37
4. F 100: Configure the transmitter
This folder allows to congure the following parameters of the transmitter: safety code, modbus, options and factory
conguration.
It also indicates the serial number and the rmware version of the transmitter.
4.1. Access to the serial number: F100
The serial number allows to get activation codes for the options.
F 100 is displayed (see previous page).
➢ Press OK.
“F 100” is displayed on the second screen and the serial number scrolls on the main screen.
4.2. Access to the firmware version: F101
F100 folder is displayed
➢ Press + key.
“F 101” is displayed on the second screen and the rmware version is displayed on the main screen (e.g: 1.01)
4.3. Lock the keypad: F 140
For more safety and to avoid any handling mistake, it is possible to lock the keys.
F101 sub-folder is displayed.
➢ Press + key.
“F 140” is displayed on the second screen and “0” is displayed on the main screen meaning the locking is off.
➢ Press OK.
“0” blinks.
➢ Press + or - key, “1” blinks, then press OK.
“LOCK” is displayed for a few seconds then the transmitter backs to the displaying of measured values.
All the keys are inactive.
To activate them again:
➢ Press OK for 10 seconds.
“LOCK” is displayed for a few seconds then the transmitter goes back to the displaying of measured values and
keys are active again.
4.4. Modify the safety code: F141
It is possible to modify the safety code.
F140 sub-folder is displayed.
➢ Press + key.
“F 141” blinks and the safety code is displayed on the main screen.
➢ Press OK.
The 1
st
zero blinks.
➢ Press + or – key to modify the digit then press OK.
The 2
nd
digit blinks.
➢ Press + or – key to modify the digit then press OK.
The 3
rd
digit blinks.
➢ Press + or – key to modify the digit then press OK.
The 4
th
digit blinks.
➢ Press + or – key to modify the digit then press OK.
“OK”» is displayed on the secondary screen.
➢ Press OK to validate the modication of the code or Esc to cancel.
The transmitter goes back to the displaying of the F141 folder with the new code indicated.
F 100: Congure the transmitter
10
Bekijk gratis de handleiding van Kimo CA 310, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kimo |
| Model | CA 310 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3754 MB |
