Kimo CO2ST-S handleiding

Niet gecategoriseerd

Kimo

4 pagina's

PDF beschikbaar

Handleiding

CO2ST-S

Stats

detector

DATA SHEET

Parameter Accuracy* Measuring range Resolution

±3% of reading ±50 ppm From 0 to 5000 ppm 1 ppm

Technical specications

*All the accuracies indicated in this technical datasheet were stated in laboratory conditions, and can be guaranteed for measurements carried out in the same conditions, or carried out with calibration compensation.

Features

• RCR relay output 3A/240 Vac

(NC), power supply 24 Vac/Vdc

• ABS V0 IP20 housing

• “¼ turn” system mounting with

wall-mount plate

• Housing with simplied

mounting system

Visual and audible alarm,

red led in front

Range from 0 to

5000 ppm

Output 1 RCR relay. NO (normally opened): 5A / NC (normally closed): 3A / 240 Vac. Common mode voltage <30 Vac

Power supply 24 Vac/Vdc ±10%

Consumption 3 VA

Relay and alarm status Red led in front and internal buzzer (70 dB at 10 cm)

Electrical connection 2014/30/EU EMC; 2014/35/EU Low Voltage; 2011/65/EU RoHS II; 2012/19/EU WEEE

Raccordement électrique Terminal block for cables Ø0.05 to 2.5 mm

. Carried out according to the code of good practice

PC communication USB-mini Din cable

Environment Air and neutral gases

Measured parameter

Bekijk gratis de handleiding van Kimo CO2ST-S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.