Kiloview P3 Mini handleiding
Handleiding
Je bekijkt pagina 40 van 48
Copyright@2024 KILOVIEW Electronics Co., LTD
P3 5G Wireless Bonding Encoder·User Manual
36
9.1 Bonding Status Explanation
You can view the real-time status of devices in the bonding network through the management system, such as real-
time rates of each channel, packet loss rates, data transmission and reception statistics, and latency, as shown below:
Figure 46 Bonding Status Information
9.2 Bonding Configuration Explanation
To use the bonding feature, you need to enable the bonding service switch and configure the IP address, port number,
and authorization code for connecting to the bonding server. Depending on your requirements, you can also enable or
disable dynamic bitrate adjustment and select the communication links for aggregation transmission. Finally, click the
"OK" button to apply the configuration settings.
Parameter Description:
⚫ Server Address: Enter the IP address or domain name for connecting to KiloLink Server Pro.
⚫ Server Port: Enter the corresponding service port number open on KiloLink Server Pro.
⚫ Authorization Code: Enter the authorization code specific to this device for connecting to KiloLink Server Pro.
⚫ Bitrate auto Adjust: Enable or disable dynamic bitrate adjustment.
⚫ Encryption: Enable or disable data encryption for P3 Mini aggregation transmission.
Figure 47 Bonding Status Configuration
Bekijk gratis de handleiding van Kiloview P3 Mini, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kiloview |
| Model | P3 Mini |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8497 MB |
