Kiloview P3 Mini handleiding
Handleiding
Je bekijkt pagina 39 van 48
Copyright@2024 KILOVIEW Electronics Co., LTD
P3 5G Wireless Bonding Encoder·User Manual
35
9 Uses Bonding Function
To achieve bonding transmission with P3 Mini, you need a KiloLink Server Pro server. Here's how to configure it:
Install a KiloLink Server Pro server and configure the registration information for P3 Mini devices on the server side (For detailed configuration
and usage instructions, refer to the KiloLink Server Pro operation manual).
Before enabling bonding transmission on the P3 Mini device side, configure the corresponding parameters to connect the P3 Mini device
with KiloLink Server Pro.
Steps to use the aggregation feature on the P3 Mini device:
1.Click on the "gear" icon in the aggregation area of the main interface to enter the aggregation configuration page. Fill in the following
information: server address, server port, authorization code, and choose whether to enable encryption. Select the network communication
links that will participate in the aggregation communication.
2.Check the communication links that need to participate in the aggregation.
3.Turn on the "Bonding" switch to start aggregated streaming.
By following these steps, the device can aggregate transmit audio and video information simultaneously through multiple communication
links.
Figure 45 Bonding Service Configuration
Note
Removing the storage device while recording may permanently damage the recorded files, making them unplayable.
After recording is complete, ensure to stop recording before removing the storage device to ensure proper playback of
the recordings.
Bekijk gratis de handleiding van Kiloview P3 Mini, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kiloview |
| Model | P3 Mini |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8497 MB |
