Kichler Bead handleiding

Ventilator

Kichler

54 pagina's

PDF beschikbaar

Handleiding

Step 1. Step 1. Insert the blade through the slot on the motor housing, align the Insert the blade through the slot on the motor housing, align the

holes on the blade and blade bracket, secure with the screws and washers holes on the blade and blade bracket, secure with the screws and washers

provided. Repeat process with the other blades. (Fig. 13)provided. Repeat process with the other blades. (Fig. 13)

Step 1.Step 1. Remove the screw marked with a dot label on the mounting plate and Remove the screw marked with a dot label on the mounting plate and

save for later use, and slightly loosen the other two screws. Attach the switch save for later use, and slightly loosen the other two screws. Attach the switch

housing to mounting plate using the two key slots in the switch housing. housing to mounting plate using the two key slots in the switch housing.

Replace the previously removed screw and securely tighten all 3 screws. (Fig. Replace the previously removed screw and securely tighten all 3 screws. (Fig.

14)14)

54" Bead LED | 11

ATTACHING THE FAN BLADES

INSTALLING THE SWITCH HOUSING

Fig. 13

Fig. 14

Blade

Washer

Screw

Mounting Plate

Switch Housing

Bekijk gratis de handleiding van Kichler Bead, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.