Kichler Bead handleiding

Ventilator

Kichler

54 pagina's

PDF beschikbaar

Handleiding

12 | KICHLER.COM

INSTALLING THE LIGHT KIT AND GLASS

NOTE: NOTE: Before continuing installation, confirm that the power is still turned o Before continuing installation, confirm that the power is still turned o

at the main circuit breaker or by removing the circuit fuse. Turning the power at the main circuit breaker or by removing the circuit fuse. Turning the power

o using a wall switch is not sucient to prevent electrical stock.o using a wall switch is not sucient to prevent electrical stock.

Step 1.Step 1. Hold the light kit close to the switch housing and connect the WHITE Hold the light kit close to the switch housing and connect the WHITE

wires from the light kit and fan by pushing the connectors together. Follow wires from the light kit and fan by pushing the connectors together. Follow

the same procedure with the BLACK wires. (Fig. 15)the same procedure with the BLACK wires. (Fig. 15)

Step 2. Step 2. Tuck the connections neatly into the light kit. Remove one of three Tuck the connections neatly into the light kit. Remove one of three

screws pre-installed on the switch housing and keep for later use. Loosen the screws pre-installed on the switch housing and keep for later use. Loosen the

other two (do not remove). Place the two slot holes on the light kit over the 2 other two (do not remove). Place the two slot holes on the light kit over the 2

screws previously loosened from the switch housing. Rotate the light kit until screws previously loosened from the switch housing. Rotate the light kit until

it locks in place at the narrow end of the key holes. Secure by tightening the 2 it locks in place at the narrow end of the key holes. Secure by tightening the 2

screws previously loosened and the one previously removed. (Fig. 15)screws previously loosened and the one previously removed. (Fig. 15)

Step 3. Step 3. Secure the glass to light kit assembly and twist clockwise. Do not Secure the glass to light kit assembly and twist clockwise. Do not

over-tighten.(Fig. 16) over-tighten.(Fig. 16)

Fig. 15

Fig. 16

Light Kit

Glass

Bekijk gratis de handleiding van Kichler Bead, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.