Karcher LVS 1/2 Bp handleiding
Handleiding
Je bekijkt pagina 14 van 168
14 English
● Press the unlocking button and remove the suc-
tion pipe from the suction fitting. Press the un-
locking button and remove the floor nozzle from
the suction tube.
Illustration E
● Push the crevice nozzle onto the suction fitting of
the dust container or suction pipe until it audibly
clicks into place.
Illustration H
Floor nozzle: ideal for hard floors and carpet.
Crevice nozzle: For edges, joint, heaters and areas that
are difficult to reach.
Inserting the battery pack
1. Slide the battery pack into the battery holder and
lock it in place.
Charging the battery pack
Note
Please read the operating instructions of the charger
manufacturer, especially the chapters on safety instruc-
tions!
Note
Please read the operating instructions of the battery
pack manufacturer, especially the chapters on safety in-
structions!
Note
The battery pack is partially charged on delivery.
Charge before use and when necessary.
Note
The battery pack can only be charged when it is re-
moved.
1. Press the unlocking button and remove the battery
pack.
2. Charge the battery pack according to the operating
instructions of the charger manufacturer and the
battery pack manufacturer.
Operation
LED Display
The LED on the device shows information on the power
level and error messages.
*Eco mode: The device works with reduced suction per-
formance. The battery run time is extended.
Switching the device on/off
1. Press the on/ off button , the device starts up.
2. Press the on / off button again, the device stops.
Illustration A
Illustration B
Mode adjustment
3-mode options for power and run time management.
You can change the suction power in three steps by
pressing the mode button. Each press on this button re-
peats the Eco / Standard / Power mode in a cycle.
Illustration A
Illustration B
Mode memory
The selected mode before the last shutdown remains
stored, which is reactivated when the device is switched
on again.
Emptying dust cup
Note
To ensure an optimum suction performance,empty the
dust container before
it exceeds the dust "Max" line.
1 Switch off the device.Press the On/Off switch again
to turn the device off,
2 Pointing the floor nozzle downwards, pull the dust
container apart from the main body by holding the
dust container firmly and pressing the release but-
tons on the both sides.
Illustration I
3 Empty the dust container.
4 Reinsert the dust container.
Transport
몇 CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during transporta-
tion.
1. When transporting the device in vehicles, secure it
to prevent it from slipping or overturning in accord-
ance with the respective valid guidelines.
Storage
몇 CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during storage.
The device may only be stored indoors.
On the wall
ATTENTION
Secure installation!
Install the wall mount on a sturdy wall, beam,or col-
umn,ensuring a secure attachment.
Before hanging the device, always double-check that
the wall mount is firmly and securely attached.
Power Level
Indicators LED status Mode
1st LED light up
blue
ECO Mode*: Mini-
mum suction power
1st LED light up
blue
2nd LED light up
green
Standard Mode:
Standard suction
power
1st LED light up
blue
2nd and 3rd LED
light up green
Power Mode: Maxi-
mum suction power
Error message
Indicators LED status Information
1st LED flashes
orange
Blockage / filtration
missing
Bekijk gratis de handleiding van Karcher LVS 1/2 Bp, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Karcher |
| Model | LVS 1/2 Bp |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 29056 MB |
