Karcher LVS 1/2 Bp handleiding
Handleiding
Je bekijkt pagina 15 van 168
English 15
1 Choose the desired location on the wall and mark
the positions for the two mounting holes. Ensure the
distance between the holes is 60 mm.
For LVS 1/1, the suggested height for the mounting
holes is 700 mm.
For LVS 1/2, the suggested height for the mounting
holes is 690–755 mm.
2 Place the wall mount at the desired position and
mark the positions for the two mounting holes.
Illustration J
3 Drill two holes at the marked positions.
Illustration K
4 Insert the dowels into the drilled holes.
Illustration L
5 Position the wall mount onto the installation location
and securely fasten it using screws.
Illustration M
6 Press the unlocking button and remove the battery
pack to prevent discharge.
7 Push the device into the bracket and secure it
against unauthorised use..
Illustration N
On the Flexomate trolley
Note
The LVS vacuum cleaners can be stored on the Flexo-
mate trolley, enabling easy transportation. The vacuum
cleaner can be quickly detached and is ready for use
whenever needed.
1 Insert the FlexoLink connection into the Flexomate
adapter.
Illustration O
2 Securely rotate the Flexomate adapter to lock it onto
the Flexomate trolley. After rotating, ensure the sur-
face marked with "UP" is facing upward.
Illustration P
3 Push the device into the Flexomate adapter.
Illustration Q
Care and service
DANGER
Risk of injury!
Injuries due to touching moving parts.
Switch off the device.
Remove the battery pack.
Cleaning the filtration system
Cleaning the cyclone
1 Press the filtration release button by one hand, and
pull the filtration system out by another hand. Clean
the adhered dust off the mesh metal filter.
Illustration R
Cleaning / Replacing the filter
1 Pull out the filtration system.
2 Take the HEPA out.
Illustration S
3 Clean the filter element with gently knocking or re-
place if necessary.
4 Take the sponge filter out.
5 Rinse the sponge filter by running water and dry it
completely, or replace the sponge filter.
Illustration T
6 Install the sponge filter and HEPA in to the filtration
system.
7 With the arrow facing upward, following the direction
of the arrow, push the filtration system into the main
body until it audibly clicks into place.
Illustration U
ATTENTION
Risk of damage!
Damage to the filter elements during mechanical clean-
ing.
Carefully clean the filters by gently knocking the dirt out.
Do not expose the filter area to any mechanical loads
and replace the filters if damaged.
Do not operate the device without the complete fil-
ter elements.
Troubleshooting guide
DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the battery pack.
The device is not working
Battery is empty
Charge the rechargeable battery.
Battery is not inserted correctly
Push the battery into the mount until it locks into place.
Battery is defective
Replace the battery.
Error detected
Errors
The LED strip flashes orange, the device does not start
up.
Filtration system is not install properly.
1 Check whether HEPA and filtration is in right posi-
tion.
2 Install the HEPA into the filtration system.
3 With the arrow facing upward, following the direction
of the arrow, push the filtration system into the main
body until it audibly clicks into place.
Illustration U
Blockage
1 Floor nozzle blockage
● LVS 1/1: Disassemble the floor nozzle, and clean
the blockage.
Illustration V
● LVS 1/2: Disassemble the roller by sliding the un-
lock button. Clean the roller and remove any
blockage in the floor nozzle with suitable aid.
Illustration W
2 Suction tube blockage.
Disassemble the suction tube and remove the
blockage.
3 The dust container is full.
Empty the dust container.
4 The filters are soiled.
Clean the cyclone, HEPA and sponge filter, referring
to the section of Cleaning the filtration system.
Unsatisfactory vacuuming result
1 Remove blockages from the brush head, and suc-
tion tube.
2 Clean the cyclone or replace motor protection filter
or HEPA filter.
Customer Service department
If the malfunction cannot be corrected, the device must
be checked by the Customer Service department.
Warranty
The warranty conditions issued by our relevant sales
company apply in all countries. We shall remedy possi-
ble malfunctions on your appliance within the warranty
Bekijk gratis de handleiding van Karcher LVS 1/2 Bp, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Karcher |
| Model | LVS 1/2 Bp |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 29056 MB |
