Jung SITMA5073 handleiding
Handleiding
Je bekijkt pagina 97 van 140
Door call to bus handsfree telephone
2 At the door station, hold down
the light/programming button for
4seconds. A protracted acknowl-
edgement tone is then audible
which is repeated every 5seconds
as long as the programming mode
remains active.
5 The call button is now rmly
assigned to the handsfree bus tele-
phone.
Program additional users using the
same procedure or quit the pro-
gramming mode.
3 Hold down the light button for
4seconds. A prolonged acknowl-
edgement tone is audible in the
receiver, the muting button ashes.
A speech connection exists to the
door station. The bus telephone is
now in the programming mode.
1 Switch on the programming mode.
At the BNG/BVNG650-…, press the
programming mode button briey.
The LED1 ashes in a 2-second
rhythm to indicate that the program-
ming mode is active.
4 At the door station, hold down the
required call button for 4seconds
until a protracted tone sounds at the
door loudspeaker. The call button
is now assigned to the bus indoor
devices, no speech connection now
exists.
At the bus handsfree telephone a
different ring tone can optionally be
selected for the door call.
The volume of the door call can
be changed at the bus handsfree
telephone.
97
Bekijk gratis de handleiding van Jung SITMA5073, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jung |
| Model | SITMA5073 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13662 MB |
