Jung SITMA5073 handleiding
Handleiding
Je bekijkt pagina 98 van 140
7.1 Programming – manual
Door call to Siedle Scope/Smart Gateway Mini
In-Home
Prog.
4 Sek.
5 The call button is now rmly
assigned to the Scope/Smart
Gateway Mini.
Program additional users using the
same procedure or quit the pro-
gramming mode.
3 Press the Prog. button on the base
station for 4seconds. The LED Prog.
then ashes in a one-second rhythm.
The Siedle Scope/Smart Gateway
Mini is now in the programming
mode.
At the Siedle Scope, a different ring
tone can optionally be selected for
the door call. The volume of the
door call can be changed at the
Siedle Scope.
2 At the door station, hold down
the light/programming button for
4seconds. A protracted acknowl-
edgement tone is then audible
which is repeated every 5seconds
as long as the programming mode
remains active.
1 Switch on the programming mode.
At the BNG/BVNG650-…, press the
programming mode button briey.
The LED1 ashes in a 2-second
rhythm to indicate that the program-
ming mode is active.
4 At the door station, hold down the
required call button for 4seconds
until a protracted tone sounds at the
door loudspeaker. The call button
is now assigned to the bus indoor
devices, no speech connection now
exists.
98
Bekijk gratis de handleiding van Jung SITMA5073, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jung |
| Model | SITMA5073 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13662 MB |
