Jung SITMA5073 handleiding
Handleiding
Je bekijkt pagina 96 van 140
7.1 Programming – manual
Door call to bus telephone
2 At the door station, hold down
the light/programming button for
4seconds. A protracted acknowl-
edgement tone is then audible
which is repeated every 5seconds
as long as the programming mode
remains active.
5 At the door station, hold down the
required call button for 4seconds
until a protracted tone sounds at the
door loudspeaker. The call button
is now assigned to the bus indoor
devices, no speech connection now
exists.
3 Lift the receiver at the bus tele-
phone which you wish to program.
6 Replace the receiver at the bus
telephone. The call button is now
rmly assigned to the bus telephone.
Program additional users using the
same procedure or quit the pro-
gramming mode.
1 Switch on the programming mode.
At the BNG/BVNG650-…, press the
programming mode button briey.
The LED1 ashes in a 2-second
rhythm to indicate that the program-
ming mode is active.
4 Hold down the light button for
4seconds. A protracted acknowl-
edgement tone sounds in the
receiver, the muting button ashes.
A speech connection exists to the
door station. The bus telephone is
now in the programming mode.
Leave the receiver off the hook.
At the bus telephone, a different
ring tone optionally be selected.
The volume of the door call can be
changed at the bus telephone.
96
Bekijk gratis de handleiding van Jung SITMA5073, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jung |
| Model | SITMA5073 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13662 MB |
