Jung SITMA5073 handleiding
Handleiding
Je bekijkt pagina 109 van 140
Button of a bus telephone on the BSM650-…
2 Switch the BSM650-… to the pro-
gramming mode. To do this, briey
press the programming mode button
using a small screwdriver.
LED1 lights up and ashes slowly
after appr.3seconds.
5 The switching time for the contact
is determined by the time for which
the screwdriver is held down.
3 Select the relevant relay by
actuating the programming mode
button at the BSM650-… with the
screwdriver until the required LED
lights up (LED1=relay1).
6 Continue to program more control
buttons or quit the programming
mode.
4 Lift the receiver at the bus tele-
phone at which you wish to pro-
gram a button. Press the button you
wish to program and hold down for
4seconds.
A protracted acknowledgement tone
is audible in the receiver.
Actuation of a contact in the
BSM650-…, e.g. in order to open a
garage or switch on a staircase light.
In the BVPC850-…, programming is
performed at the PC using bus pro-
gramming software BPS650-…
Using the bus programming soft-
ware BPS650-… the switching func-
tion/time can now be changed.
1 Switch on the programming mode.
At the BNG/BVNG650-…, press the
programming mode button briey.
The LED1 ashes in a 2-second
rhythm to indicate that the program-
ming mode is active.
109
Bekijk gratis de handleiding van Jung SITMA5073, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jung |
| Model | SITMA5073 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13662 MB |
