Jung SITMA5073 handleiding
Handleiding
Je bekijkt pagina 108 van 140
7.1 Programming – manual
Additional contact on the BSM650-…
2 Switch the BSM650-… to the pro-
gramming mode. To do this, briey
press the programming mode button
using a small screwdriver.
LED1 lights up and ashes slowly
after appr.3seconds.
5 The switching time for the contact
is determined by the time for which
the screwdriver is held down.
3 Select the relevant relay by actu-
ating the Prog. mode button at
the BSM650-… with a screwdriver
until the required LED lights up
(LED2=relay2, press2x).
6 Continue to program more control
buttons or quit the programming
mode.
4 Press the button to which you
wish the relay to be assigned and
hold down for 4seconds.
A protracted acknowledgement tone
is audible in the receiver.
In addition to an already pro-
grammed bus telephone, you wish
a potential-free switching contact to
be closed when a door call is placed.
Actuation of an additional bell or
lamp on placement of a door call.
1 Switch on the programming mode.
At the BNG/BVNG650-…, press the
programming mode button briey.
The LED1 ashes in a 2-second
rhythm to indicate that the program-
ming mode is active.
108
Bekijk gratis de handleiding van Jung SITMA5073, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jung |
| Model | SITMA5073 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13662 MB |
