Jung FMGCR1700 handleiding
Handleiding
Je bekijkt pagina 40 van 94
• If the saved travel time is longer
than the shading solution’s run-
ning time, positions from bottom
shading solution stops will not be
approached correctly.
• If the saved travel time is shorter
than the shading solution’s run-
ning time, the shading solutions
will no longer travel to the bot-
tom end stop, because the con-
trol switches off beforehand.
A shorter travel time may be use-
ful to protect flowers on the win-
dow sill or to leave ventilation slots
open. It is not possible to fall short
of this position due to other condi-
tions.
Synchronisation with the shading
solution running
Due to a shading solution’s weight,
the running time from the bottom to
the top is longer than from the top
to the bottom. To compensate for
this and to synchronise themselves,
the relays only switch off 10 sec-
onds later when moving the shading
solution to its top end stop. Timely
motor switch-off is guaranteed by
the blind motors’ end stop switches.
If several shading solutions are
moving to the same position (e. g.
30 %), they should do so from the
same direction to avoid more minor
inaccuracies.
It is advisable to use one actua-
tor per motor to control shading
solutions of different lengths and
widths, or drives from different
manufacturers.
3. OPERATING MODES
Blinds
Blinds are made up of slats with a
controlled angle to the sun. These
slatted blinds have a gear unit
which, if changing direction, ad-
justs the slats first of all before
actually starting to move.
The slat angle is specified in per-
centage terms [%], with a value of
0 % corresponding to the “open”
position – where sunlight can pass
through – and a value of 100 % cor-
responding to the “closed” position.
As the travel time and the slat ad-
justment time are recorded sep-
arately, the shading solution can
be moved into a specific position
and the slat angle can be adjusted
afterwards.
Roller shutters
There is no need to adjust the slats
in roller shutters. Accordingly, the
only parameter is the adjustment of
the running time from the top to the
bottom end stop.
Skylight
The function of electrically op-
erated skylights differs from the
shading solutions described previ-
ously in that their resting position
is “closed” as opposed to “open”.
Drives of this type are controlled by
reversing, or "inverting" the drive
function.
The “Roller shutter” operating
mode is selected for window drives.
During commissioning, it must be
ensured that the fabric tightening
and slat adjustment times are not
Slatted blinds –
lighting conditions when the
slats are opened 100 % and 0 %
Roller shutters –
top and bottom end stop
8180 eNet _ Blinds, roller shutters and awnings
Bekijk gratis de handleiding van Jung FMGCR1700, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jung |
| Model | FMGCR1700 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24644 MB |
