Jung FMGCR1700 handleiding
Handleiding
Je bekijkt pagina 41 van 94
adjusted. Here, too, the actuator
extends the running time by 10 sec-
onds when moving the solution into
the resting position.
Awnings
So that electrically operated awn-
ings do not sag in the end position,
following extension the movement
is briefly reversed and the awning
is rolled back up slightly so that the
fabric is perfectly taut. This func-
tion can be taken over by the con-
trol for awning drives that are not
equipped with this function.
The relevant operating mode –
“Blind”, “Roller shutter” or
“Awning” – is set with the operating
4. SPECIAL FUNCTIONS
Other functions can be used with
suitable accessories. For activa-
tion, the devices must be connect-
ed to one another and the param-
eters in the blind actuator must be
set accordingly.
Lock-out protection
With the lock-out protection, the
user fixes the shading solution in its
top end stop and blocks all the au-
tomatic functions until the lock-out
protection is deactivated.
This protects occupants from any
unpleasant surprises – such the
Wind alarm
A wind sensor enables shading
solutions to be automatically raised
depending on the wind strength.
The top end position protects sen-
sitive blind slats or awnings from
being destroyed by a strong wind or
storm.
Sun protection
A brightness sensor can be used
to automatically move the shading
solutions into a sun protection po-
sition, e. g. for plants in the flower
box or to screen off office worksta-
tions.
Twilight function
The twilight function automatically
lowers the blinds to provide privacy
when it starts to get dark.
5. BLIND BUTTON
The eNet blind button controls the
blind system’s flush-mounted in-
serts. The flush-mounted inserts
thus function as a complete eNet
blind actuator. The blind button
contains the receiver module, which
receives the commands from eNet
transmitters and transmits them to
the flush-mounted insert.
Device setup:
1. Flush-mounted insert for blind
system
2. Cover frame
3. eNet blind button
4. Status LED
Awning – top and bottom end stop
mode switch on the wireless actua-
tor or with the eNet server.
The operating mode switch can
also be used to set the shading
solution’s running time and – de-
pending on the shading solution –
the adjustment time for slats or
fabric tightening.
roller shutter on the patio door au-
tomatically closing while they’re in
the garden.
8382 eNet _ Blinds, roller shutters and awnings
Bekijk gratis de handleiding van Jung FMGCR1700, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jung |
| Model | FMGCR1700 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24644 MB |
