Juki MF-3580 handleiding
Handleiding
Je bekijkt pagina 113 van 440
− 41 −
(4) Mounting position of needle thread adjusting path
1) Mount the needle thread path guide
3
, and tighten the setscrew
5
.
2) Mount the needle thread adjusting path
1
in the needle thread path guide
3
.
Measure the standard dimension (27mm) and tighten the setscrew
6
.
™
Raising the needle thread adjusting path
1
causes the needle thread to be loosened.
™
Lowering the needle thread adjusting path
1
causes the needle thread to be tightened.
1. When the two setscrews
7
are loosened and the needle thread support adjust plate
4
is moved
vertically, it is possible to change the height of "F" and that of "E."
2. If there is no coincidence between position of each thread path
1
and that of the needle thread
support adjust plate
4
, this can be a cause of problems such as stitch skipping, thread breakage,
and worse tightening of the needle thread.
(5) Mounting position of needle thread support adjust plate
1) Let the lever thread path
2
stay at the lower dead point.
2) Loosen two setscrews
7
of the needle thread support adjust plate
4
and move the needle thread support adjust
plate
4
vertically. Measure the standard dimension (1.6mm) and fasten two setscrews
7
.
™
Raising the needle thread support adjust plate
4
causes the needle thread loop to be enlarged.
™
Lowering the needle thread support adjust plate
4
causes the needle thread loop to be diminished.
Bekijk gratis de handleiding van Juki MF-3580, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Juki |
| Model | MF-3580 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 79694 MB |
