JET Skyhyker SKY25 handleiding
Handleiding
Je bekijkt pagina 28 van 40
8 Maintenance
Proper maintenance can increase the life expec-
tancy of your machine.
Follow the schedules below to ensure the SkyHyker operates
safely and properly and provides maximum life to parts and
assemblies.
8.1.1 Before Each Use
1. Inspect cables for damage including kinks and broken
wire strands. Replace the cable if the cable is kinked or
more than three wire strands are broken. Do not use the
lift until the cable is replaced. To replace the cables, view
or download the cable replacement instructions found on
our website. Either visit jettools.com/skyhyker or scan
the QR code below (see Figure 8-1). IMPORTANT: For all
cable use and maintenance, follow the guidelines under
OSHAStandard1926.1413.
8.1 GENERAL MAINTENANCE
Maintenance should be performed on a regular
basis by qualied personnel. Always follow proper
safety precautions when working on or around any
machinery.
2. Make sure mast/legs locking plate is in the locked position
(see Figure 8-2).
3. Makesurethemast/legslockingplatetssnugglyintothe
base while in the locked position. If not, loosen the locking
plate block bolts, adjust the locking plate block, and tighten
the locking plate block bolts (see Figure 8-3).
4. Grease the mast/leg locking plate pivot point as needed
using the grease zerk (see Figure 8-4)
Figure 8-1: SkyHyker Landing Page QR Code
Figure 8-2: Mast/Legs Locking Plate in Locked Position
Figure 8-3: Mast/Legs Locking Plate Block
Figure 8-4: Mast/Legs Locking Plate Grease Zerk
25 | Chapter 8: Maintenance
Bekijk gratis de handleiding van JET Skyhyker SKY25, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | JET |
| Model | Skyhyker SKY25 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16855 MB |
