JET JWJ-8HH-BLK handleiding
Handleiding
Je bekijkt pagina 11 van 28
11
Figure 7-11A
Figure 7-11B
Figure 7-11C
Fence
Refer to Figure 7-12:
1. Attach fence handle (A) to fence (B).
2. Loosen fence base assembly upper bed
adjustment lock (C) and fence tilt adjustment
lock (D).
3. Place fence on jointer table assembly. Make
sure the protective fence pad blocks (E) are the
only surfaces of the fence that contact the
infeed and outfeed tables.
4. Loosen and back out the two cone screws (F)
on the fence base assembly tilt plate (G). Do not
remove the cone screws but leave the cone tips
exposed from their mounting holes.
5. Pull center arm support bar (H) to align support
bar hinge block (I) with fence hinge block (J).
Insert center arm hinge axle (K) through support
bar hinge block (I) and fence hinge block (J).
6. Adjust fence (B), tilt plate (G), and fence base
assembly upper bed (L) as needed to align tips
of cone screws (F) with the horizontal holes in
the two fence hinge axles (M).
7. Tighten both cone screws (F) until they seat into
the horizontal holes of the two fence hinge axles
(M). Lock cone screws in place by tightening
two M10 hex nuts (N) against tilt plate.
8. Make sure fence 90° stop plate (O) is flipped
down into place to contact the 90° stop bolt (P).
9. Using the fence handle (A), adjust the fence to
a 90° angle. With a 90° square, check that the
fence is 90° from the tables. If the fence is not
at 90°, adjust the angle using the 90° stop bolt
(P) and nut. When the 90° angle is correct,
tighten the fence tilt adjustment lock (D).
10. Slide the fence bed assembly upper bed to the
desired location and tighten the upper bed
adjustment lock (C).
Figure 7-12
Bekijk gratis de handleiding van JET JWJ-8HH-BLK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | JET |
| Model | JWJ-8HH-BLK |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9382 MB |
