JET JCDC-3 handleiding
Handleiding
Je bekijkt pagina 8 van 20
8
5.3 Tools required for assembly
Hex keys, 4mm and 5mm (provided)
Open-end wrench, 10/12mm (provided)
Cross-point (Phillips) screwdriver
5.4 Assembly
1. Install four casters (L) to base (C) with pan head
screws (HP2). See Figure 3.
2. Install left and right stands (D
1
,D
2
) to base (C)
with flange head screws (HP9).
3. Install stand support (T) to stands with flange
head screws (HP5).
Figure 3
4. Install four casters (M) into the threaded nuts
beneath drum (F). See Figure 4.
Figure 4
5. Lift main housing (A) using hoist with straps
through lifting rings atop main housing. If hoist
is not available, at least 2 persons must lift
housing.
Main housing is heavy.
Two-person lift, or use hoist.
6. Position main housing (A) between left and right
stands (D
1
,D
2
), and secure with flange head
screws (HP2). See Figure 5.
Figure 5
7. Install funnel (B) beneath main housing. Secure
with funnel clamp (G). See Figure 6. Tighten
screw on funnel clamp securely.
Figure 6
8. Install side cover (N) on left and right stands.
See Figure 7.
Bekijk gratis de handleiding van JET JCDC-3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | JET |
| Model | JCDC-3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3796 MB |
