Handleiding
Je bekijkt pagina 27 van 29
Other dysfunctions
Symptoms
Checkpoint
FHD (1920x1080) is displayed,
but only up to 30 Hz.
• When using HDMI, is it correct that the HDMI to HDMI cable is 2.0? •
When using Type-C, please check whether it supports USB3.1 protocol. •
Does your graphics card support FHD@60hz on your ports? (Even though
it supports FHD, it can only support up to 24Hz or 30Hz).
No sound
• Are the computer and audio equipment turned on?
• Check the audio cable connection.
• Is the volume set too low?
• Is the sound set to Mute?
There is a strange noise
• Are the cables correctly connected?
The screen turns off (or
flashes)
Depending on the power capacity of the computer, the power supply may become
unstable, for example during a power outage (or flickering). To avoid symptoms, we
recommend connecting to an external power supply of 5V/2A or higher.
Brightness setting is not saved
Please use an external power supply that can provide suitable power for your model.
The brightness setting can be retained even after power off, only when power is
supplied to the main unit.
(Note) Regarding Type-C connection:
*For Mac and some models, the input source may not change when replacing the Type-C port. In this case, restart the monitor
and disconnect/connect the cable.
*Switching input source from HDMI to Type-C may not work on Mac and some other models. In this case, unplug the HDMI
cable and change the input source.
26
Bekijk gratis de handleiding van Japannext JN-MD-i156FHDR-T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Japannext |
| Model | JN-MD-i156FHDR-T |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 2119 MB |
