Handleiding
Je bekijkt pagina 28 van 29
Precautions when connecting only Type-C
If symptoms such as screen failure (no display) or flickering occur when using only a Type-C
connection, first connect to an external power source of 5 V/2 A or more, reduce the brightness
value, then try again. Please use the Type-C connection again.・Even with only a Type-C connection,
the brightness level at which the screen is displayed varies depending on the power capacity of the
connected device (computer, etc.) . If you only use the Type-C connection without connecting an
external power source, the connected device can only have a Type-C connection.
We also recommend that you first check the maximum brightness that the screen can display.
To check in advance the maximum brightness the screen can display with only a Type-C connection,
set the brightness to 0 when connected to an external power source of 5V/2A or higher.
Then connect only Type-C (*1) and gradually increase the brightness value until the screen is no
longer displayed, until the brightness that the screen can display is reached.
(*1) Please make sure to test in an environment where you can change the connection to the power
supply from an external power supply of 5V/2A or more.)
27
Bekijk gratis de handleiding van Japannext JN-MD-i156FHDR-T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Japannext |
| Model | JN-MD-i156FHDR-T |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 2119 MB |
