Janome Memory Craft 100E handleiding
Handleiding
Je bekijkt pagina 95 van 112
93
Troubleshooting
Condition Cause Reference
The machine is
noisy.
1.
T
hread is caught in the hook race.
2.
L
int is built up in the hook race or bobbin holder.
Page
86
Page
86
The needle
thread breaks.
1.
T
he needle thread is not threaded properly.
2.
T
he needle thread tension is too tight.
3.
T
he needle is bent or blunt.
4.
T
he needle is incorrectly inserted.
5.
T
hread is too thick or too ne for the needle.
6.
T
hread is jammed in the hook area.
7.
T
he thread is tangled around the spool.
8.
T
he needle thread was not set in the thread holder when
embroidery sewing started.
Pages
17-18
Page
11
Replace the needle.
Page
13
Page
13
Page
86
Use the spool holder.
Page 28
The bobbin
thread breaks.
1.
T
he bobbin thread is not threaded properly in the bobbin holder.
2.
L
int has collected in the bobbin holder.
3.
T
he bobbin is damaged and does not turn smoothly.
Page
16
Page
86
Replace the bobbin.
The needle
breaks.
1.
T
he needle is incorrectly inserted.
2.
T
he needle is bent or blunt.
3.
T
he needle clamp screw is loose.
4.
T
he needle thread tension is too tight.
5.
T
he needle is too ne for the fabric being used.
Page
13
Page
13
Page
13
Page
11
Page
13
Skipped stitches 1.
T
he needle is incorrectly inserted, bent or blunt.
2.
T
he needle and/or threads are not suitable for the work being
sewn.
3.
A b
lue tip needle is not being used for sewing stretch, very ne
fabrics and synthetic fabrics.
4.
T
he needle thread is not threaded properly.
5.
A s
tabilizer is not used when sewing stretch fabrics.
6.
A p
oor quality needle is used.
7.
T
he embroidery hoop is not set properly.
8.
T
he fabric is not stretched tightly enough on the embroidery hoop.
Page
13
Page
13
Page
13
Pages
17-18
Apply a stabilizer.
Replace the needle.
Page
28
Pages
26-27
Seam puckering. 1.
T
he needle thread tension is too tight.
2.
T
he needle thread or the bobbin thread is not threaded properly.
3.
T
he needle is too heavy for the fabric being sewn.
4.
A s
tabilizer is not used when sewing very ne fabrics.
Page
11
Pages
16-18
Page
13
Apply a stabilizer.
Bekijk gratis de handleiding van Janome Memory Craft 100E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Memory Craft 100E |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 24843 MB |
